Post A Pic Of Your Pc Here :)

Yeah could try that, or maybe slipstream the drivers. But I've got Server 2003 all installed now and I can't really be bothered to reinstall it.
 
spirit said:
Yeah could try that, or maybe slipstream the drivers. But I've got Server 2003 all installed now and I can't really be bothered to reinstall it.
Click to expand...

Yeah. Installing XP can take a lot of time to installing correct driver.

I'm not sure if your server can boot USB but it should work on your computer since it is one gen new than my laptop Socket 478.
 
I think I'll just stick with Server 2003. Got it all installed and it won't be long before I start setting it up now.
 
This website has been completely off of my radar for a few months, and within these past few months I built my computer. I noticed my bookmark and Decided to post up a shot of my PC, which I had just cleaned.
MyComputerOpen.jpg
 
Last edited:
BurningSkyline said:
This website has been completely off of my radar for a few months, and within these past few months I built my computer. I noticed my bookmark and Decided to post up a shot of my PC, which I had just cleaned.
MyComputerOpen.jpg
Click to expand...

Look nice! I see you have XIGMATEK Heatsink. They make great 120 MM fan and heatsink. I have it, replaced my 120 mm fan on Thermaltake Contac 30. More CFM, more quite.
 
BurningSkyline said:
This website has been completely off of my radar for a few months, and within these past few months I built my computer. I noticed my bookmark and Decided to post up a shot of my PC, which I had just cleaned.
MyComputerOpen.jpg
Click to expand...

Nice one!
From what I can see on this photo your cable management is almost perfect!
keep up the good work.
 
Cable management is a bit of a mess in my opinion... On the right side you can see extra inputs for the fan controller on the case, and the backside is a bit of a mess but nobody will see that. I'm definitely considering swapping out the white LED fans for others and putting in an NZXT Hue instead.

Quick question, my hard drive is pretty darn loud when its on a lot of the time. Do you think it is defective?

EDIT: Didnt notice it said 20GB 660 Ti in my sig, I wish haha
 
Last edited:
BurningSkyline said:
Cable management is a bit of a mess in my opinion... On the right side you can see extra inputs for the fan controller on the case, and the backside is a bit of a mess but nobody will see that. I'm definitely considering swapping out the white LED fans for others and putting in an NZXT Hue instead.

Quick question, my hard drive is pretty darn loud when its on a lot of the time. Do you think it is defective?

EDIT: Didnt notice it said 20GB 660 Ti in my sig, I wish haha
Click to expand...

What is hard drive specs you're talk about? As my experience my few of WD usually to failed on me.
 
BurningSkyline said:
Cable management is a bit of a mess in my opinion... On the right side you can see extra inputs for the fan controller on the case, and the backside is a bit of a mess but nobody will see that. I'm definitely considering swapping out the white LED fans for others and putting in an NZXT Hue instead.
Click to expand...
Your cable management is better than mine!

tumblr_m4omhyk51n1rr8jsmo1_1280.jpg


Stupid case. :P
 
What are you 2 complaining?!

Mine is horrible if you see your cases
dsc01862ey.jpg


Edit; where are your hdd connectors btw spirit? can't seem to find it lol.
 
Aah now I see them, my mobo is much worse in terms of cable management. It's because the HDD connectors are right under that I can't get the cable management better...
 
if thats the CPU power i see going over the gpu, you can probably route it under it and get a much cleaner look, just hug the edge of the motherboard.
 
FuryRosewood said:
if thats the CPU power i see going over the gpu, you can probably route it under it and get a much cleaner look, just hug the edge of the motherboard.
Click to expand...

If the cables on his OCZ 700W version PSU are the same length that were on my OCZ 600W,It wont reach. :cool:

I had to buy a 4 pin CPU extension cable for mine then run it behind the mobo tray and up through the top. :P
 
His cables are the same as mine. Assuming the case is of comparable size, then he can either run it between the board and the backplate, or pull the cable as tight as it will go and be about 1mm from breaking the connector, but it will go behind the backplate none the less.
Either is cleaner than running it over everything like he has.
 
Yeh, I can fit some more cables behind it. But the biggest problem are that sata connectors. I want a new board, so I can fit it behind the board and on the right.
But I want to buy first some other things though...
All that said, I never had heat issues. I got even nice temps.
And the chamber is really hot always...
 
people are misunderstanding what I am saying. Run it UNDER the GPU not behind the motherboard. If its going over the GPU it has more than enough length to go under it.
 
You must log in or register to reply here.
Back
Top