Post A Pic Of Your Pc Here :)

voyagerfan99 said:
I was originally gonna post this for the photo tourney, but I like my first one better.

Please excuse the dust :D I cleaned it after I saw this pic! I even applied some new thermal paste, which was badly needed.
Anyway:
100b3420aw7.jpg
Click to expand...

look, your wrong. the fan always BLOWS towards the wires. the leading edge of a fan is curved, the trailing edge is straight. the sticker is very often facing the blowing direction of the fan so a rear facing fan does not have the sticker poking out in plain sight.

lemme guess, your temps suck?
 
Last edited:
lovely? said:
look, your wrong. the fan always BLOWS towards the wires. the leading edge of a fan is curved, the trailing edge is straight. the sticker is very often facing the blowing direction of the fan so a rear facing fan does not have the sticker poking out in plain sight.

lemme guess, your temps suck?
Click to expand...

your fan is upside down!!!!

it goes by the fan blades not the wire
 
Last edited:
are you serious? take a picture of your exhaust fans, and prove yourself wrong.

google images:
Computer_setup_1_3_by_rayvinazn.jpg

boxback560.jpg

exhaust_fan_case_cr.jpg
 
Last edited:
voyagerfan99, in your picture, the fan blades are going to spin left to right, which means that it's going to suck air up. Instead of blowing it onto the HS like it should.
 
funkysnair said:
yes i did lol cos i am an idiot....

but you are right in a sense but not 100% right on the fan blowing towards the wires:D
Click to expand...

well only because i was sure he realized that his fan was a case fan, and was not made 100% for cpu's, but then again he does have the fan facing the wrong way so i guess i assumed too much :rolleyes:
 
lol-i got myself all confused!!! couldnt think why you wer biting at my post then realised that i quoted you when you where the one that i was trying to back up lol....

ill go to bed early tonight
 
Okay guys I'll say it. You were right and I was wrong. :rolleyes:

The problem here is the hole size in the fan. When I first got that fan, the holes were too small - I couldn't get my screwdriver through. So, we drilled larger holes. I am therefore unable to turn it around. I took my side fan and flipped that out for the blue fan (checking the airflow first and then drilling the holes necessary). This red fan does not work as well as the blue one though (as I just discovered by taking off the temperature sensor so it blows full speed) so I will therefore either get a new fan (same one) and replace the red one or get a new heatsink and fan altogether so my temps go lower.

And to make things worse - my screws are nearly stripped.
 
nice to see a fellow michigander on here... or is it michiganian???
anyway it looks good, and that look like a very comfortable gaming chair. i hope your not involved in some chop shop :P
 
Last edited:
You must log in or register to reply here.
Back
Top