Post your SuperPi Score!

[thandakid]

Well you edit your post there is a delete option and then one box you have to check man bodaggit 922 posts uffffff...... no delete till now

 

[mikesrex]

That's BS. Full screenshot.

No way a 2.0Ghz Core 2 Duo will crunch 1M that fast.

My i7 920 stock @ 2.66Ghz will only do it in 17 seconds...

I just run my i7-920 at stock clock to get a superpi 1M result of 14.9 seconds. I wonder why yours does 17.

 

[Mitch?]

 

[Bodaggit23]

I just run my i7-920 at stock clock to get a superpi 1M result of 14.9 seconds. I wonder why yours does 17.

Not sure either. I'll check it again if I ever unclock it. I could be mistaken.

 

[Ramodkk]

I just run my i7-920 at stock clock to get a superpi 1M result of 14.9 seconds. I wonder why yours does 17.

Even if they're the same CPU, they're not going to perform the same. 15 seconds to 17 seconds is a reasonable gap, even for identical CPU's.

 

[gamerman4]

I did it for each core

 

[Bodaggit23]

I just run my i7-920 at stock clock to get a superpi 1M result of 14.9 seconds. I wonder why yours does 17.

The only thing I can come up with is that I used an older version of SuperPi
the very first time I ran it.

The first time I ran it stock, I got this:
http://i158.photobucket.com/albums/t113/Motovader72/Stock.jpg

I just ran it again at stock and got this:
http://i158.photobucket.com/albums/t113/Motovader72/Stock2.jpg

 

[Geoff]

Sorry guys, I'll be updating it shortly.

 

[Aastii]

I am still in the process of overclocking, but i don't want to go much further without getting an after market heatsink, so expect another one a little further down the line

I know it is hard to make out, but i am running an E6750 at 3.1GHz (stock is 2.66GHz)

 

[markallen]

I am still in the process of overclocking, but i don't want to go much further without getting an after market heatsink, so expect another one a little further down the line

I know it is hard to make out, but i am running an E6750 at 3.1GHz (stock is 2.66GHz)

I ran my E6750 @ 3.8 ghz with a stock heatsink and fan.

 

[Hugh9191]

Mine

This is for the rig in my sig. Never tried overclocking it.

No where near the top but it's not bad.

 

[Aastii]

I ran my E6750 @ 3.8 ghz with a stock heatsink and fan.

I am considering getting it higher, but i am now at 50 degrees idle, but, this is confusing me, even when gaming it doesn't raise any higher

If i stress test though it gets to 75 degrees which is a little worrying

 

[bubblescivic]

Sorry guys, I'll be updating it shortly.

it's been a while since mike posted his 9.015

seems like you would update it by now

 

[Geoff]

Scores updated.

There were a few people who posted scores, but not with the SuperPi Mod program. If you want your score added please use that.

 

[Candy]

I ran my E6750 @ 3.8 ghz with a stock heatsink and fan.

Can you tell me what settings that was at? As in what voltages, and did you have to overclock your memory?
Also did you stress test? I can't get mine past about 5 min on Prime95 at 3.6, so I'm obviously doing something wrong.

 

[Aastii]

Can you tell me what settings that was at? As in what voltages, and did you have to overclock your memory?
Also did you stress test? I can't get mine past about 5 min on Prime95 at 3.6, so I'm obviously doing something wrong.

you are not necessarily doing anything wrong, every chip is different, you may not be able to push yours as far as he has without losing stability or without whacking voltages up more than he has to

Here is my result with super pi mod though, pissed at how close to sub 16 i was

[/URL] [/IMG]

 

[Geoff]

Scores Updated.

 

[MIK3daG33K]

Damn! I just missed the update. CPU 3.4 Ghz

 

[Geoffrey70]

 

[Gooberman]

yeah, I'm last on score board