Post A Pic Of Your Pc Here :)

My desktop (see sig.) as I cleaned it out (soooooo much dust) and reassembled it.

**note: I am trying to link from photobucket. If it doesn't work, then someone please explain how to fix it.**

SUNP0044.jpg
[/IMG] Empty case

SUNP0045.jpg
[/IMG] Mobo tray.

SUNP0046.jpg
motherboard just before being reinstalled.

SUNP0051.jpg
[/IMG] Mobo installed.

SUNP0062.jpg
All wired up.

SUNP0066.jpg
[/IMG] Hey, It lives. muhahahaha.

ok, Ill get a few of the cleaned (zip ties, and E-tape) wiring and the externals later. Need to get a few batteries to the camera.
 
WOOT! My CM 690 II advanced is here and I did a quicky install of everything. Still need to fix the mess of wires behind the hard drive cage, although the camera pic/flash makes it FAR more noticeable than looking at it in real life.

I also picked up a cheap thermaltake CPU cooler, and I LOVE it. It won't cool serious overclocks, but I was just running the stock cooler most of the time because of it being so easy to remove and re-install. But this thermaltake has easy push pins that work great, solid copper base and 4 heatpipes. Not bad. It's keeping my I5 655k at 4.6ghz at 70c core temp.

Newtower1-1.jpg


Newtower2.jpg
 
Looks great :rolleyes: ;)

Its nice to see they have put holes in the mobo tray for the wires to go through,I had to cut mine myself on the CM690 is was a nightmare to cut,Mainly because i didnt have the right tools for the job though :P
 
Fixed the spaghetti mess behind the hard drive cage. The wires in the front are because I have two SSD's right on top of each other there so the power cable wires are bunch up there because of 2 connections. I might sleeve it with black, much less noticeable then.

Newtowerfixed.jpg
 
Last edited:
not bad of an afternoon. i just noticed the colours are really close to the R O G Logo. best one i seen in this thread pinky. v chuffed, and only 50 bucks new.

20101031_1.jpg


20101028_5.jpg
 
Last edited:
Yea I'm giving up a few FPS and running it a notch down in an 8x slot to give the upper card cool air, otherwise they're nearly touching. Should've got a 2-way SLI instead of a 3-way board. :rolleyes:
 
jevery said:
Yea I'm giving up a few FPS and running it a notch down in an 8x slot to give the upper card cool air, otherwise they're nearly touching. Should've got a 2-way SLI instead of a 3-way board. :rolleyes:
Click to expand...


Id cut out a hole in that bottom plate and mount a thin 120mm fan sucking up air towards the bottom 460...probably alot of hastle though.
 
the top looks like its buckling...

i have seen some other benches better than that, but they are for people who test componants and have extreme cooling etc etc.

i wouldnt use it for a perminent setup
 
.

.
Decided to treat myself to a third 460 since today's my Birthday, Trick or Treat!!

Haven't run any benchs yet. I'm anxious to see if it'll make much difference. :rolleyes:
.
 
You must log in or register to reply here.
Back
Top