How to remove back panel to replace hard drive on a HP 17-cp1035cl

R

rvham

New Member
I removed the 4 screws that are showing on the back but I think there are some hidden. Anyone have some input? Thanks
 
Have pictures of bottom and top (keyboard side)? I can't find a guide for that specific model but used to disassemble enough HP's I could probably guess where they're hidden.

If it has any rubber feet, check under that. 4 might be it and you just need to pop it apart too, just depends on the design.
 
Pull up the rubber feet, there are likely several screws under those. They usually can be stuck back in to place when you're done working on it without much trouble.

Also unplug it and disconnect the battery first thing you do once you get it open.
 
I usually gently work the easiest looking corner.

It's pretty easy to rip out a ribbon cable or antenna if you aren't looking at what you're doing.
 
Great. Got it off. Replaced HD to install Linux but would not boot. Might be something with UEFI. Reinstalled the Windows 11 drive and booted. May try the duel boot option. But before I do that how would I do a factory reset if needed? Thanks everyone for the help. Always cautious when diving into un-charted territory (remove back panel). Merry Christmas to all.
 
You must log in or register to reply here.
Back
Top