Blue LED Fans

MixedLogik

New Member
Well, After about 2 hours of research, I plan to mod out my case alittle bit. Im going to but some sick case fans in there to really make it look nice. Im also going to get a fan controller. This all started when I noticed my GPU temps were going over 70C. I have one crappy 92mm case fan. Im going to put a 92mm Blue LED Fan on the back, a 80mm Blue LED Fan at the bottom, and 2 other small fans on the side. I came up with this.

SilenX IXP-54-14B 80mm Blue LED Case Fan - Retail
http://www.newegg.com/Product/Product.aspx?Item=N82E16835226003

SilenX IXP-64-14B 92mm Blue LED Case Fan - Retail
http://www.newegg.com/Product/Product.aspx?Item=N82E16835226006

SYBA CL-RM-35FD 3.5" Front Panel Illuminated Fan Controller - Retail
http://www.newegg.com/Product/Product.aspx?Item=N82E16811998007
 
Last edited:
Thanks PC-eye
It's all around pretty hot, and I wanted to kinda modded it out. I may get some Led lights in their to make it look really cool. Im probably going to get a vpu cooler like you said.
 
If you are only getting the fans for the light, not for the airflow, then I'd go with blue cold cathodes instead. http://www.newegg.com/Product/Product.aspx?Item=N82E16811994001. Much cheaper and a ton brighter. One of these cathodes would make more light than all the LED fans you are putting in your case, plus it's about half the price of one of the fans. I took my old LED fans out once I got the cathodes because they were noisy and I only wanted them for the color.
 
Along with what tux said.
Youre better off getting a good quiet fan and then buying cathodes rather than trying to kill two birds with one stone with and LED fan.
 
Yeah, although looking at those fans, they are pretty quiet. I'm just saying that you could probably get fans with the same airflow and same noise level without the LED for less, but maybe not. Cathodes are a good idea nonetheless because they are so bright.
 
IMGP2942.jpg

Inside mine with just the fan LED.

ComputerPic1.jpg

Inside mine with dual 12" cathodes.
 
http://www.athenatech.us/A301.htm

I plan to mod it out though, with LED Cathodes that you guys suggested, the fans im getting, and Im going to paint the silver sides a translucent blue, like the power button, fans, Leds, etc... It will take around a month to finsh, I'll get Pics when Im done.
 
So you were able to get the silver one not the black colored Antec 900 there. The picture above showing the Zalman 9700 would look the same here except for the Antec blue led 120mm fans on the side cover I added.

That was faced outward to vent warm air from around the video and sound card area due to how the board sits above the supply in the 900s. The fan itself was taken from the old case after over 1 1/2yrs. of use and is still quiet.
 
Back
Top