NEED HELP *question
- Thread starter aspire
- Start date
Going old school there I see. 
Have any old Kenwood or Marantz lying around?
For old component speakers like those you would at least a good receiver with the option for input. Then you patch the output of the sound card into the receiver or through a small mixer if impedence problems came up. The output jacks on sound card are 1/8" while inputs on the receiver or amp used would have to be the RCA phone type unless you custom spliced or located the mini to whatever type patch cord used.
Have any old Kenwood or Marantz lying around?For old component speakers like those you would at least a good receiver with the option for input. Then you patch the output of the sound card into the receiver or through a small mixer if impedence problems came up. The output jacks on sound card are 1/8" while inputs on the receiver or amp used would have to be the RCA phone type unless you custom spliced or located the mini to whatever type patch cord used.
With the old 200w speakers you would need something with adequate output to avoid frying the magnets from under powering them. That's the way the old component speakers work with the amp matched to the max the speakers are rated for. Actually the more power worked even better like a 200w amp for 100w speakers!
For pc use there are plenty of 5.1 and 7.1 surround sound sets that will simply plug right into the jacks on the soud card without fuss! That would also eliminate the worry about possible feedback loops and other crap where you hear the humming and buzzong of the amplifier of an amp or receiver or other amplified device.
For pc use there are plenty of 5.1 and 7.1 surround sound sets that will simply plug right into the jacks on the soud card without fuss! That would also eliminate the worry about possible feedback loops and other crap where you hear the humming and buzzong of the amplifier of an amp or receiver or other amplified device.
I had 4 house speakers hooked up to an old amp back in the day and it sounded great... I eventually fried the left chaneel and had all four running off of the right 
never damaged my speakers that I could tell but the amp sure wasn't lovin life... It will work but I would only recommend it if u don't care about wrecking stuff... (i used mine like that for over a yr)
never damaged my speakers that I could tell but the amp sure wasn't lovin life... It will work but I would only recommend it if u don't care about wrecking stuff... (i used mine like that for over a yr)The main problem there is simply patching from the 1/8" mini jacks into the RCA type phono plugs on the rear of the amp or receiver used. Use the gold plugged adapter cable(s) to patch. You may still get some buzzing or humming sound when patching this way however.
Digital or optical out from a sound card would be the preferred method to consider for use with a larger separate amplication source. You are likely to run into a few problems staying strictly old analog trying to boost the audio that way.
Digital or optical out from a sound card would be the preferred method to consider for use with a larger separate amplication source. You are likely to run into a few problems staying strictly old analog trying to boost the audio that way.