Cutting case for fans?

J

jrusty15

New Member
I have a cheapo Antec case that only has one fan in the rear and a fan on the PSU. I don't care about cutting up the case, but I wanted to see what I would be getting myself into if I used a dremel to cut a hole or two in the case to put more fans. I plan on upgrading my Vid card and overclocking my CPU some more so cooling will be an issue. Any help would be appreciated. Thanks!
 
Use a hole cutter on a drill and that will do the job correct then stick a nice case fan gaurd on the outside then that will cover the sharp bits
 
I used a 3" hole saw on my cordless drill to put a blow hole in the top of my case. Slapped a 90mm fan and a grill on it. Took 20 minutes. Works great.
 
You must log in or register to reply here.
Back
Top