Computer not working...

S

sonab

New Member
New Cpu and Motherboard and not working...

I bought a new Core 2 quad 9550 2.8 Ghz processor and new motherboard Gigabyte P43C-DS3.
I installed it on my computer and i checked that all installed correctlly.
Now, when i turn my computer on, he comes to the part that loading information about what i have in computer and then stuck....or if i go to bios its stuck there too after some seconds...and sometimes its just do restarts... .
Someone can help me please?
 
Last edited:
try clearing your cmos...

if that doesnt work, open her up and check make sure everything is connected right (cpu fan, hard drive etc)

try unplug your componants and reconnecting them both ends of your sata cable just to make sure they are seated right
 
Im trying, but its tapye "cmos error " or u know that chart( bus/dev/fun..etc) when he generating information about the computer? so its stuck there, and the last line its "ACPI Controller"..
And this motherboard have face-led...and that shows all lamps
 
Last edited:
no you dont need to start your computer up!

its actually on the motherboard, its either a 3prong jumper or a button like on mine...

read your mobo instructions and locate the cmos and do as it says to flash it but you might want to check the connections of your componants etc.

make sure you cpu fan is spinning when you try boot your pc up
 
i think i got the reason!...
The ram that i got is not supported by the motherboard, i will go today to buy new ram and maybe it will work, hope so.
 
You must log in or register to reply here.
Back
Top