Changing channels

mrjack

mrjack

VIP Member
I have a very wierd sound system right now. The problem is caused by the subwoofer and center speaker, they use the same output. And I have to use a splitter to split them up, the thing is it takes one stereo output and changes it into two stereo outputs. The thing is that the subwoofer is getting the same channel (left) as the center speaker is and should be getting (still left channel). How could I change the channel that the subwoofer is receiving from left to right? Cause it's pretty annoying that my subwoofer only makes a sound when the center gets signal.

GTA10
|
|
|
Y------JH1-TB50R
|
PC

This is the setup I use with the sub/center. I know that you can pull the cable out a bit to get only one channel connected when using a stereo plug, but in my case I would still be getting the wrong channel.

EDIT:
Or could I get some sort of splitter which turns 1 stereo signal into 2 mono which would be 1 left and 1 right channel?
 
Last edited:
But the thing is I can't find anything like that in the stores in town, atleast I haven't found anything like that yet.
 
in the states I'd tell you to go to Radio Shack, dunno if you have them or if there's an equivalent in Finland, but if someone has it, they usually do
 
We don't have Radio Shack and the closest thing to it is the only electronics shop in town, which is in a "monopoly" situation in town so they can have the store closed on saturdays even though every other store is open.
 
You must log in or register to reply here.
Back
Top